Wirewound braking resistors can be suitablefor rugged applications. Two terminal extensions are fixed on both ends of aceramic tube on whose surface winds wave-shaped alloy resistance wire and ahigh temperature resistant and fireproof coating are applied. The ceramic tubecan function as resistance wire skeleton and heat radiator as well.
Key Features:
1.Long term high stability;
2.non-inductive or inductive type options;
3.high operating voltage(up to 1.2KV) and high power ratings(up to 15KW);
4.terminals suitable for soldering or boltconnection.
Characteristics of this series:
1.Rated power: 50W-15KW, based on 25℃ free airrating;
2.Resistance values: from 1Ω to as high as10 KΩ( to 100 KΩ on request);
3.Temperature Coefficients:25,50 and100ppm/℃ or as required;
4.Operating Temperature:-55℃ to +225℃;
5.Insulation Resistance: >1000MΩ (500V25℃ 75% relative humidity);
6.Dielectric strength: >3.0KV 50Hz 1min(25℃ 75% relative humidity);
7.IP protection: IP00, IP20 or as required;
8.Element material: OCR25AL5/CrAlFe/CrNi/CuNi;
9.Lead material: Brass Caps(lug terminations available);
10.Encapsulation: Silicone conformal coating.
Application:
1.simulation load testing, capacitor charging & discharging;
2.automation control , inverter's energy loss brake;
3.crane systems, various steel mill applications and transit applications, neutral grounding;
4.filter,electrical machinery general use, available through distribution.
| Resistor |
| IP Class |
IP00 |
| Nominal Voltage range (V) |
12-1200 |
| Power range (W) |
80 |
| Resistance Range (Ω) |
1-10K |
| Size (mm) |
Diameter:28(±2) Length:152(±3) |
